Ultrasonic Equipments

About this product:

Ultrasonic Pest Repellar Machines (RODENT / RAT / MICE). Also repels other Pests like Spiders, Cockroaches, Ants, etc.

  • Plug-in deviceultrasonic_pest_repellar_at_pest_cure_inc-
  • Easy to install
  • Low Power Consumption
  • Will not affect other electrical equipment
  • Only indoors purpose
  • Safe with non rodent pets & human beings
  • Power Consumption: Less than 1 watt input : 220 Volts AC
  • Dimensions: 6”X4” X 5”
  • Effective coverage of the unit in the LOUD PITCH setting can be 930sq.mtr. (10,000sq.ft.),
  • Room acoustics & sound-deadening materials as may be present may affect coverage


  • Harmless to human and most pets.
  • No Toxic chemicals or messy traps.
  • Compact and handy.
  • Easy to install
  • Negligible power consumption maintenance.
  • Can operate 24 hour non – stop.
  • Different from medicines smoke/door without the fear of second pollution.
  • recurring expenses No one time investment
Behavior of Rats when it is installed:
  • It takes 8-10 days for the instrument to have its effect on Rats/Mice.
  • Sound becomes unbearable and they leave the area Rat get imitated and look out for quit suffer areas.
  • As a result of sound pressure, some rats becomes violent hence there should be an opening like the door or the window for their escape.
Adverse effect on the Pests’ nervous system:
  • Ultrasonic sound waves have a bad effect on the nervous system of Rodents and make them sluggish.
Eating habits and mobility:
  • If Rodents stay in contact with the ultrasonic sound wave for more than 3 or 4 days, possibility is that their eating habits are affected and mobility also decreased.

Possible Locations of Usage:
  • Food Processing Factories, Pharmaceutical Companies etc. that cannot use chemical drug.
  • Warehouse, Furniture Shops, Food Stores, Sweet Shops, Textile Showrooms, General Stores etc. which suffer from losses of the products bitten by rats.
  • Restaurants, Departmental Stores, Supermarkets, Hospitals, Hostels, Malls, and Apparel shops etc.
Points to be taken care off while installing the device:
  • The area where the machine is installed should have at least three surfaces i.e. ceilings, side walls, and floor to have the maximum bouncing/reflection of sound waves. Partitions reduce the effective area of the unit.
  • The machine should be directed towards any hard- surface for maximum bouncing effect.
The reflection of sound waves vary from surface to surface, some example are:
  • Glass Surface – 100%
  •  Plain finished walls – 80to 90%
  • Rough finished walls – 60 to 70 %
  • Wooden surface - 60 to 70 %
  • Gunny bags/Corrugated boxes – 25 – to 30%
  • Do not place transonic on carpeted surfaces, behind furniture, draperies or other soft objects as they will absorb the sound waves.
  • Do not place transonic next to your ear before performing this check.
  • Do not use transonic Pest Control use outdoor or let the unit come in contact with water.

Pest-Cure deals in ultrasonic bird control , ultrasonic pest control etc.